The Seal Mats Flex-50 offer an ideal and economic solution for the secure short-term sealing of 13mm diameter sample collection tubes in the 50-well format Grid rack. After capping 50 tubes in one turn, the retaining foil can be removed to leave each tube individually capped. Drawing upon proprietary Novitain technology, Novitain Seal Mats Flex offer a rapid solution for capping 50 racked IVD tubes using the Novitain Manual Capper MC2.
Temporary storage of IVD-Tubes
In medical laboratories analytical tests are usually conducted on clinical specimens (e.g. blood or urine) in order to obtain information about the health of a patient as pertaining to the diagnosis, treatment or prevention of a disease. Medical laboratories are thus focused on applied science mainly on a production-like basis, as opposed to research laboratories that focus on basic science on an academic basis.
During specimen collection, blood must be drawn in a specific order to avoid cross-contamination of additives between sample collection tubes. The procedure is the same for all types of tubes or instruments used. It is vital that the order is followed not only to avoid contamination, but also to ensure accuracy of test results. The smallest error could mean that the patient might not receive the most appropriate care and treatment for his specific case.
Next to avoiding cross-contamination and assuring accuracy of test results during the pre-analytical and analytical phase, these elements are also important during the post-analytical storage phase of the blood collection tubes. In case additional tests need to be conducted, a medical laboratory needs to be assured that the sample has not been contaminated during the storage procedure. Novitain offers the unique NovitainTM Post-Analytical Capping Solution to ensure sample integrity during storage.
Multi-pierceable without losing seal integrity
Compatible with sample collection tubes with a diameter of 13.0mm
Resists chemical solvents
Seal Mats Flex in Natural are made out of Medical approved material (USP Class VI certificate)
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
Class 7 Clean Room
Novitain labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
|Material||Thermo Plastic Elastomer|
|Temperature range||-20°C to +100°C (without foil)|
|Article number||Description||Unit size||Case size|
|N20100||Natural Seal Mats Flex for tubes in 50-well format||10 clusters||1|